Mini-PC Reviews System

Geekom A6 Mini-PC in test – Blast from the Past, can the 6800H still score?

We have already tested several systems from the Geekom A-series here and have recently reached the A8 model number, but now they are adding the number 6 in between. So let’s see what this slightly older processor has to offer and whether we might find an interesting bargain.

Packaging and scope of delivery

We already know these boxes from the other Mini-PCs in this series, the front is dominated by a large picture of the top and a small sticker on the back provides information about the contents.

There’s plenty of cardboard inside too, and it seems that the side fixings have even had to absorb a heavy knock on the way to me.

However, the included accessories seem to be doing well.

The usual set of combined VESA and wall mounts, matching screws, HDMI cables and a 120 watt hyleton-120W-1906320 power supply are included.

Specifications

Before we start screwing it on, here is an overview of the technical details. Further information can be found on the manufacturer’s product page.

Kommentar

Lade neue Kommentare

e
eastcoast_pete

Urgestein

3,069 Kommentare 2,030 Likes

@Tim Kutzner : Stimme zu! Ich habe den Eindruck, daß Geekom sich irgendwann einmal mit zig-tausenden dieser Gehäuse billig eingedeckt hat, und jetzt alle mini-PCs in dem Format darin verbaut werden, auch wenn's thermal keinen Sinn macht.
Von der allgemeinen Leistung her eigentlich nicht so schlecht, aber für das, was der A6800H Stand 2025 zu bieten hat, um gut € 150 - 200 zu teuer. Für ungefähr denselben Preis gibt's bei der Konkurrenz Phoenix/Hawk Minis, die um einiges besser (und besser belüftet) sind.

Antwort 2 Likes

B
Besterino

Urgestein

7,624 Kommentare 4,136 Likes

Lag der so lange bei Dir rum und bist erst jetzt zum Testen gekommen? ;)

Sorry, zu alte Hardware zu teuer.

Antwort Gefällt mir

Alkbert

Urgestein

1,309 Kommentare 1,084 Likes

Ich habe in der Praxis MinisForum Brotkisten, die um Längen besser durchlüftet sind, auch wenn praktisch im "Officebetrieb" hier keine Spitzenleistung gebraucht wird, die Laufzeit ist doch erheblich und wenn die Kisten schon neu grenzwertig belüftet sind, will ich nicht wissen, wie es aussieht, wenn die nach 2 Jahren Bürobetrieb mal richtig "durchgestaubt" und "durchgedreckt" sind.

Antwort 2 Likes

e
eastcoast_pete

Urgestein

3,069 Kommentare 2,030 Likes

Gute Kühlung und einfaches Warten ist für sowas (Einsatz als Arbeitstier) nochmal wichtiger.

@Tim Kutzner: Der Aspekt Kraftzwerge mit guter Belüftung und herausnehmbaren Staubfiltern wäre durchaus einen Artikel wert!
Du hast doch hier einen sehr guten Überblick; könntest Du mal hierzu einen Artikel schreiben? Mir ist leider kein Kraftzwerg bekannt, der einen herausnehmbaren Staubfilter hat.

@manufacturers of mini-PCs: An easily removable dust filter that can be quickly cleaned and reinserted would be a real differentiator, and help you sell more units!

Antwort 1 Like

Tim Kutzner

Moderator

1,057 Kommentare 865 Likes

Mir auf Anhieb auch nicht :D

Antwort 1 Like

Igor Wallossek

1

13,150 Kommentare 26,116 Likes

Dann wird es Zeit für ein DIY Projekt!

Antwort 2 Likes

e
eastcoast_pete

Urgestein

3,069 Kommentare 2,030 Likes

Bin schon dran😄! Versuche es gerade mit einem externen 120 mm Lüfter und Filter zwischen dem externen Lüfter und dem Lufteinlass des Minis. Lüfter ist 5V und wird über USB betrieben. Ich muß allerdings noch die optimale Drehzahl finden , bei der noch deutlich Luft durch den Filter gedrückt wird, ohne daß der Lüfter hörbar laut läuft.
Sobald das funktioniert, kommt so ein LmF (Lüfter mit Filter) auch unter meinen Laptop!

Leider habe ich keinen 3D Drucker um das optisch gefälliger zu machen, aber für PoC (Proof of concept) geht's auch ohne 😁.

Antwort 1 Like

Tim Kutzner

Moderator

1,057 Kommentare 865 Likes

Update​

Der Preis wurde aktualisiert, mit dem Code “A6igorslab” für Amazon und “igorslabA6” beim Hersteller direkt kommt man nun auf 494 Euro.

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Tim Kutzner

Supporting force on cooler, periphery and 3D printing arcticles.
Linux novice and wanna-be datahorder with DIY NAS.

Werbung

Werbung