Noise development
The noise development of the Vero L6 over the entire load range can be easily understood with the help of this diagram. The X-axis shows the load of the 12-volt rail, while the Y-axis shows the combined load of the auxiliary lines. This provides a complete picture of all practical load conditions that can typically occur in real systems. The measurements were carried out at an ambient temperature of 30 to 32 degrees Celsius, i.e. under thermally realistic conditions.
The color distribution shows that the power supply unit initially remains comparatively quiet in the lower load range. Up to a 12-volt load of around 150 watts, the fan operates in a range that remains acoustically inconspicuous and, depending on the load distribution, also enables values in the range around or below 20 dBA. This corresponds to a gentle start-up behavior that is perceived as pleasant in everyday PC use.
However, as the load increases, the fan starts to work much earlier than with high-quality power supply units with more complex control curves. The large pink and turquoise colored zones show that the Vero L6 switches to clearly audible operation from around 250 to 300 watts at the latest. Values in the range of 30 to 40 dBA dominate the majority of the load spectrum. This is due to the limited thermal reserve of the platform used, whose heat sinks are smaller and therefore more dependent on fan support.
It is noticeable that the volume development is relatively independent of the load on the secondary lines. The colored areas remain homogeneous over almost the entire Y-axis, which means that the decisive factor is the 12-volt load. This corresponds to the real usage behavior of modern PCs, where the CPU and GPU determine the overall thermal dynamics. The diagram shows that the Vero L6 works pleasantly quietly in the lower load range, but produces a clearly audible background noise under medium to high system load. For typical office or light gaming systems, operation remains largely unproblematic, but a noticeable noise development should be expected under permanently high loads.
Measurement methods in detail
Cybenetics uses a clearly defined, reproducible method to determine the noise development of a power supply unit. Measurements are taken in a controlled environment in which the power supply unit is operated over more than 1450 different load combinations. This large number of measuring points is a significant difference to conventional tests, which usually only evaluate a few fixed load conditions. This results in a complete acoustic load profile that reflects the entire operating reality and does not just pick out individual scenarios.
The evaluation is carried out in the form of the so-called LAMBDA classes. These range from well below 20 dBA for very quiet power supply units to ratings for devices that are clearly audible or even disturbing during operation. The classification classifies the average noise level determined across all measured load points. This means that the focus is not just on a peak value, but on the actual overall average volume that can be expected in everyday use.
Cybenetics measures the volume directly in front of the device, uses calibrated microphones and keeps the environment acoustically constant so that external influences are excluded. The precision of the measurements allows for fine differentiation, which is clearly shown by the individual color segments in the noise diagrams. Each color represents a defined dBA range and illustrates the combinations of 12-volt load and sideline load at which the fan adjusts its speed.
In this evaluation, the Vero L6 achieves the Standard class, which describes a medium noise level. This classification does not mean that the power supply unit is unstable or unpleasantly loud, but that the platform enters an audible range earlier than higher-quality models with larger heat sinks or smoother fan control due to its design. The fan curve in this class is usually functional, but relatively direct in order to reliably meet the thermal requirements of the compact design.
The technical evaluation shows that although the Vero L6 is audible under load, its behavior is predictable and stable within its class. The volume measurements thus underpin the positioning of the power supply as a price-conscious solution with an objective, practical cooling strategy that ensures reliable heat dissipation via an acoustically moderate, but not whisper-quiet fan profile.
Endorfy Vero L6 750W ATX 3.1 (EY7A014)
 | Lagernd, Lieferung 1-2 WerktageStand: 23.12.25 07:41 | 69,89 €*Stand: 23.12.25 07:42 |
 | Auf Lager | 69,90 €*Stand: 23.12.25 07:42 |
 | versandfertig in 3 bis 5 Werktagen | 69,90 €*Stand: 23.12.25 06:34 |
28 Antworten
Kommentar
Lade neue Kommentare
Urgestein
1
Veteran
1
Urgestein
Neuling
Veteran
Neuling
Veteran
1
1
Urgestein
Neuling
Veteran
Veteran
Mitglied
Mitglied
Neuling
1
Alle Kommentare lesen unter igor´sLAB Community →